Inateck Dual Sata Docking Station

Document

inateck SA02003 USB 3.0 Dual SATA HDD Docking Station Instruction Transmission

Introduction

This product back up data copy and clone between dual HDDs.
Meanwhile, it adopts USB3.0 (Super Speed) with date transfer charge per unit up to 5Gbps and SATA3 (6Gbps) and backward compatible with earlier versions equally well. This excellent manual performance and proficient compatibility is convenient for data commutation and perfectly suitable for the men who need to batch processing and clone data at some sure places, such every bit film and television set production, Backup & processing IT data, Schools batch processing data etc

Overview

How to Use

Connect the external power adapter from the difficult drive dock to an electrical outlet.
Connect the included USB three.0 cable from the hard bulldoze dock to an available USB port on the computer arrangement.
Insert a 2.five" or 3.v" hard drive into the acme loading slot.
Press the power button. A pop-up chimera in the job bar at the bottomright of your screen notifying yous once your hard drive has been recognized. Y'all may besides find the difficult bulldoze in Disk Direction.

Notation:

To remove the difficult drive, make certain it is currently not being accessed by the computer so unmount or uninstall the deejay drive from the operating arrangement. Never remove the docking station while the hard drive is in use. Doing then may corrupt the data on the hard bulldoze or harm the hard drive, docking station, or computer.
When connected via USB, the dock will automatically go into sleep mode if the connection is left idle for more than 30 minutes. The ability LED indicator will always be on and the colorful atmosphere calorie-free at the lesser will enter the slow flashing state. Accessing the difficult drive will automatically abolish sleep style and power the drive back up.
The hard drive LED indicator will flash, the power LED indicator will be constantly on and the bottom colorful atmosphere lite will enter the fast flashing state.
Please do not remove your hard drive or insert a new one while the other hard drive is being accessed, as doing so the other bulldoze temporarily disconnects and this could damage your hard drive and result in data loss.

Hard Bulldoze Offline Clone

Brand certain there are no connection on the USB.
Insert the drives straight downwardly until the connexion is secured. Offline clone is from HDD A to HDD B. Make sure your Main Drive is in HDD A and slave in HDD B. The capacity of HDD B must be equal or bigger than HDD A.
Press and hold the offline button for 3 seconds, the LED indicator that marks 100% clone progress volition calorie-free up. Quickly press the button again, and offline clone starts. 4 LED lights betoken the clone progress.
One by one they volition flash and be on. When the offline clone is 100% completed, iv LED lights will stay on.

Technical Specifications

Product Proper name	USB3.0 Dual SATA HDD Docking Station with Offline Clone Function
Model Number	Inateck SA02003
Weight	410g
Color	Black
Drive Size	2.5"/three.5" SATA I/II/III HDD/SSD
Interface	USB3.0 up to 5Gbps
Material	ABS plastic
Hot Plug, Plug & Play	Supported
Licenses	CE, FCC
Dimensions	150mm length × 109mm width × 60mm height
Environmental	Storage: -20 to lxx ° C; Operating: five to xl ° C
Operating Systems	Windows XP/vii/eight/8.1/x, Mac Os 9.0 and college
Tool gratuitous	Aye
Driver	No software or drivers required

Package Contents

SA02003 Docking Station × 1
USB three.0 Data Cable × 1
DC Power Adapter × 1
Instruction Manual × i

Troubleshooting/FAQ

Unable to clone: Delight check if the capacity of Deejay B is larger or equivalent to that of Deejay A. Here the capacity means the actual capacity that tin can be used, instead of the ane marked on the product.For example, the actual chapters of a disk marked 500GB might exist 480GB simply. The bodily capacity of disks with the same marked chapters differs if they are produced by different producers. To ensure ii disks of the same marked capacity have the aforementioned actual capacity, they should be produced by the same producer in the same batch with the aforementioned model number.
Indicator low-cal stops flashing up during offline duplicating: information technology might because of disk bad sectors so that data couldn't exist cloned equally usual.
It's improve to modify a good disk.
After cloning, the rest capacity of B deejay is showed and operated via "Computer management – Storage – Disk management".
Why over 2TB hard disk couldn't be identified past USB? Because the maximum capacity of hard deejay which Windows XP can supports is 2TB and couldn't be identified by arrangement if over 2TB. It just supports after upgrading the operating arrangement above Vista (64 bit) version and nosotros propose irresolute hard disk into a GPT disk sectionalisation, or the operating arrangement will not support over two TB disk partitions.
Please brand sure that B hard disk drive information can be covered earlier cloning data. Because one time y'all start cloning, B hard disk drive partition methods and data are completely cloned as A difficult disk. Our company does NOT undertake any responsibility for data or economy loss which could bring by damaged information.
Delight do non remove your difficult bulldoze or insert a new one while the other hard drive is being accessed, as doing so the other drive temporarily disconnects and this could impairment your hard drive and issue in data loss.

Service Heart

Europe
F&K Technology GmbH
Tel: +49 341 5199 8410 (Working day eight AM – iv PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Federal republic of germany

North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day ix AM – 5 PM PST)
Address: 2078 Francis St., Unit of measurement fourteen-02, Ontario, CA 91761, United states

日本
Inateck 株式会社
電話番号：+81 06 7500 3304
〒 547-0014 大阪府大阪市平野区長吉川辺 3 丁目 10 番 11 号

Importer/Responsible Person:

Europe
F&One thousand Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410

UK
Inateck Applied science (United kingdom of great britain and northern ireland) Ltd.
95 Loftier Street, Office B, Great Missenden, Uk, HP16 0AL
Tel: +44 20 3239 9869

Manufacturer
Shenzhen Licheng Engineering Co., Ltd.
Address: Suite 2507, Cake eleven in Tian An Cloud Park, Bantian
Street, Longgang Commune, Shenzhen, Guangdong, China